ColecoVision Collection Manager
Hardware
← Back to hardware

rCAP ADAM Computer System Power Supply (with DB9 Y-connector)

8-bit Milli Games · Power Supply Discontinued
Platform, category and status for this entry were derived automatically from the source list and have not yet been checked by hand.
No photographs catalogued for rCAP ADAM Computer System Power Supply (with DB9 Y-connector) yet
No photographs catalogued for this item yet.
Catalogue IDHW-0059
Manufacturer8-bit Milli Games
Person or teamWilliam Hicks/Milli/8-Bit Milli
TypePower Supply (Power)
Connects viaDiscontinued
PlatformADAM
StatusDiscontinued
Manufacturer site https://consolemoo.com
SourceCollectors DB v1.00 Master

Notes

One of ConsoleMoo's rCAP external supplies for the Coleco ADAM, this version fitted with a DB9 Y-connector so the supply can feed two points rather than one.

Why it is needed

  • Its power supply lives inside the daisy wheel printer, so a printerless machine will not start.
  • The supply must provide +12V on two pins, +5V, -5V and ground; the negative rail rules out an ordinary adapter.

WHAT rCAP STANDS FOR, and what the Y-connector's two ends serve, are not recorded here. The repurposed-printer-cable version is catalogued separately.